Product Overview
Modern business networks are used for increasingly diverse applications – traditional data streams, VoIP voice traffic, video output from digital security cameras and remote control devices to name a few. The range of devices attached to today’s converged network often need to be supported not just in terms of data – equipment such as VoIP IP telephones and Wireless Access Points frequently need to be powered in physical locations where mains power is not available or difficult to deliver. Providing power to such devices via an Ethernet UTP cable is an elegant and easy to implement solution.
compatible to IEEE802.3af/at. It can power both existing
10/100Base-T network devices Wi-MAX and wireless
IEEE 802.11n access points.

High Performance Wire-Speed Switching
The PSE1816GSR offers 16 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP ports. The two Gigabit TP ports can be either 1000Base-T for 10/100/1000Mbps o interface. PSE1008GSR boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 7.2Gbps. Its two built-in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.

Key Features
Up to 30W of Power on IEEE 802.3af/at
Compatible With All IEEE 802.3af/at or Legacy
Safe: Low Power Devices Receive Only the Power TheyNeed
Safe and Reliable Power to WLAN Access Points
Automatic Detection and Protection of Non–standardEthernet Terminals
Supports 10/100 Base-T applications
Compact Design Fits Easily in WLAN Access
Plug-and-Play no configuration required
Internal power supply
Easy installation and maintenance
Save up to 83% power with Green Technology

Complies to IEEE 802.3af PoE standard and is backward

Hardware Specification
10/100Mbps Ports	16*10/100Base-TX RJ-45 Auto-MDI/MDI-X Copper ports
1000Mbps Ports	2*10/100/1000Mbps RJ-45 Auto-MDI/MDI-X Copper ports
SFP/mini-GBIC Slots	2*1000Base-SX/LX, shared with Port-17~Port-18
Switch Architecture	Store-and-Forward
Switch Fabric	7.2 Gbps / non-blocking
Switch Throughput	5.36Mpps@64Bytes
Address Table	8K entries
Share Data Buffer	512Kbytes
Maximum Frame Size	9K Bytes
Flow Control	Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex
LED	Power (yellow ); PoE(yellow);10/100 LINK / ACT (Green) 1000 ACT(Green);1000 LINK(yellow)
Reset Button	< 5sec:System reboot; >5 sec:Factory Default
Dimension(W*D*H)	293*165*44 mm, 1U height
Weight	1.6 kg
Power Requirement	100~240V AC, 50-60 Hz
Power Consumption	150 Watts maximum
Dissipation	510 BTU/hr maximum
Standards Conformance
Standards Compliance	IEEE802.3:10Base-T IEEE802.3u: 100BaseTX IEEE802.3z:1000Base-SX/LX IEEE802.3ab:1000Base-T IEEE802.3af/at: Power over Ethernet
Environmental
Operating	Temperature: 0~ 50 Degree Relative Humidity: 20 ~ 95%
Storage	Temperature: -10~70 Degree; Humidity:20~95%(non-condensing)